Prior Conservatories Home Page   Create an Outlook that is exceptional
Home About Us Contact Us Refer This Site Testimonials Gallery Whats Included Trade Only Order Forms Blog
Conservatory Builder
Gable End Conservatory
Lean To Conservatory
Hiped Lean To Conservatory
Victorian Conservatory
Edwardian Conservatory
Bespoke Conservatory
Rehau
Planning Permission
Technical Specifications
Building Your Conservatory
Adding Value
Another Room
Through the seasons

Blog Categories

Archived Posts

DIY Conservatory Blog DIY Conservatory Blog

Underfloor heating

Tuesday January 22, 2008 at 6:36pm

Underfloor Heating - Which type should I use?

Using underfloor heating to heat your conservatory / home can prove to be a very efficient way to heat because it's invisible once installed and allows you the freedom to design your interior the way you want.

Basically there are two types of underfloor heating:

Electric underfloor heating and water-filled Underfloor Heating.

Suppliers of each type of underfloor heating method will of course claim that their method is best.

Electric Underfloor Heating is a cable underfloor heating system - its main advantages are that it's easy to install and cost effective.

Warm Water Wet Systems however are growing in popularity. Some conservatory installers we have consulted say that they now only fit / recommend the water underfloor central heating system, as they have found that with the electric under floor heating, you may still need to use additional heaters on the coldest days. Unfortunately however - it's often not really practical to consider water-filled Underfloor Heating in a conservatory - the logistics and space available can make it quite difficult but not impossible. The important point here is to plan ahead - provided the option to add a "warm water wet system" is considered at the planning stage, before the conservatory base is constructed, then this is one of the best ways to heat a conservatory.

Underfloor heating is a great ideWarm water from the boiler system is circulated through continuous lengths of pipe embedded in the floor, each room has its own circuit and all circuits are connected to a distribution manifold. As each room has its own circuit it is a simple process to apply room temperature control, a thermostat is fitted in the room and connected to an electrically operated valve on the circuit serving that room.

» Categories: DIY Conservatories Blog
Add to: Digg Add to: Del.icio.us Add to: StumbleUpon Add to: Furl Add to: Google

Comments

There aren't any comments for this post yet. Why not be the first to comment?

Leave a Comment

Your Name  
Email Address  
(kept hidden)
Website
Comment  
Human Validation Check  
What is 19 - 8 ? Answer

 
Quality, comfort, security & warmth for your conservatory..